Impact Resistance Test (Drop Test)                                                                                                                                          

UL Test:

As per NFPA 1936.         

NFPA Test:

The power unit is dropped from a height of 620 mm (2 ft) onto a steel plate. The power unit shall then power a tool through 5 cycles and generate the maximum rated pressure during each cycle.

• Home • Up • Impact Resistance • Noise Test • Incline Operation • PU Pressure • PU Dump Valve • PU Endurance • Fitting Pull • BV/PR Device • BV/PRD Endurance • DV Endurance • Hydrostatic Strength •